November 4, 2009

How to Watch Your PC on a TV

How to Watch Your PC on a TV

By Bryan Lambert – September 6, 2009

Pull Quote 233Many people have purchased large screen flat female viagra panel televisions over the last few years and one of the cool by-products of having an HDTV is many will have a plethora of inputs that will allow you to view your desktop computer quickly and easily right on your television. Some of the geeky pleasures of having the ability to output your computer to a TV are showing off videos or photos on the big screen, and using it as a very large work or gaming screen. In this Tech Tip, we are going to look at some quick and easy methods for viewing your computer's output on your television (these tips work great for projectors as well).

What you will need:

The quick, cheap and basic way to get a computer to show up on a TV is to plug it in. If you have a desktop pc, you may be able to use the cable that you have right now going to your monitor. If you have a notebook computer, you’ll need to buy an additional cable(s).

Here’s the common inputs you’ll see:

VGAVGA Cable
This is the tried and true connector that we have seen on computers, well almost forever. This is the connector that nearly every HDTV will have. Sure you may not get the resolution you need, and it can’t play back protected content (think Blu-Ray movies), but it is quick and simple to use.

S-Video
Some computers have it, some don’t – but S-Video is also a quick and easy way to get the computer screen working on the TV. The nice thing about S-Video is that it will many times work on standard resolution TVs if you still have one hanging around (the resolution is not that good, but it's a nice way to show off pictures).

DVI Cable
DVI is a terrific format to use, not only because it can support very high resolutions, but also because it can support full resolution HDCP protected content (High Definition movies such as found with Blu-Ray). Because the signal is digital (VGA isn’t), you also tend to get a much better looking picture than you would than with VGA. The cable can cost more, and it doesn’t carry audio (you’d need a separate audio patch cable for that), however the next cable on our list does.

HDMI Cable
For hooking a computer to an HDTV, this is definitely the way to go for many people because it's one cable that carries both video and audio, it supports HDCP protected content and high resolutions, and is relatively inexpensive. One drawback is that while many laptops have an HDMI connector, many desktops do not – so you’d need to add that port yourself (usually through a video card upgrade).

Wireless
Some companies, such as IOGear also offer wireless solutions for both video and audio. Wireless tends not to support the higher resolutions, but can be alot of fun to use.

Tips…

Some common caveats to look out for:

  1. You need to go into your video card “control panel”, use a function key or go into the video card properties to set up the computer for “dual monitor use” if you have a laptop or are leaving your main monitor connected if using a desktop. For TV display, most people just choose to “mirror” the display (same image appears on both monitors).
  2. Unless you are using HDMI, you’ll need to run a separate audio cable for audio through the TV.
  3. The highest resolution you can display is what can be supported by both the TV and the video card (it is just like a big monitor after all).
  4. For Blu-Ray protected content, you’d need to set your output to the HDTV only – it will not usually display on both TV and monitor (you may also need to set the audio out to SPDIF for Blu-Ray movies to get the audio on the TV as well).
  5. Some laptop computers tend to “lose” the audio capabilities of HDMI when using drivers not designed for the unit (even if it is a “recommended” update from your computer automatic updates).
  6. You may need to “play” with the TV’s aspect ratio to make the computers output “fit” properly to the TV screen.
  7. Be sure that you set the source on your TV to match the input you are using on the computer.
  8. Make sure that the cables are plugged in all the way – it’s really easy for a cable to slip out “just a little”.

In Conclusion

roomWhether you want to show off some photos in a slide show or use your Entertainment PC for use as a Blu-Ray player, hooking up your computer to a HDTV is a great way to use your HDTV to its full capability. So fire up the PC, plug it in and let the fun begin!

Permalink • Print • Comment

July 28, 2009

Video Format Guide

Video Format Guide

By Scott Nesbitt – Sunday, March 15, 2009

"But like anything in the realm of computer technology, the video we watch is wrapped up in a morass of jargon and of weird extensions."Video may have killed the radio star, but it's become more than just something that we watch on our televisions. Video is definitely an essential part of the desktop and Web experiences of most computer users. And more than just a few mobile phone users, to boot.

But like anything in the realm of computer technology, the video we watch is wrapped up in a morass of jargon and of weird extensions. If you don't know your .avi from your .mov or .flv, then read on.

Formats vs. container formats

When it comes to other kinds of files, we all have a pretty good idea of what a file format is. We know that a Word file is a binary that contains all of the text that we've typed into the word processor, the style information, and graphics too. But the situation is different with video.

When people talk about video formats, they're referring to something called a container format. The container format is a detailed description of what's inside a video file. It describes the structure of the file, as well as the kind of data that the file contains.

The container format also holds information about something called a codec. The codec is information about how the file was encoded, specifically what software (called a codec, not surprisingly) was used to digitally encode the file. This is important, especially for a couple of the formats that are described in this TechTip. Why? Not every media player supports the same codecs. In many cases, you'll need to install a specific codec in order to play a file using your favorite media player.

MPEG

MPEG is short for Motion Picture Experts Group. It's a standard for both a variety of video and audio formats, and for compressing those formats. In fact, the array of formats that use MPEG compression can be confusing.

There are different versions of the MPEG format (often called levels) which help contribute to this confusion. The three MPEG levels that you're likely to encounter are MPEG-1, MPEG-2, and MPEG-4.

What's the difference between all of them? MPEG-1 is the oldest of these. It was first used in video CDs (the precursor to the DVD), where space was at a premium. MPEG-2 tackled (and still does) the transmission of digital and high definition over digital networks, satellite TV, and (later) the Internet. In fact, MPEG-2 is so efficient that it pretty much killed off MPEG-3 — it handles high definition video just as well as its descendant. MPEG-4 does pretty much everything MPEG-2 does, but with better quality and compression. MPEG-4 adds another twist to the mix: it supports Digital Rights Management (DRM), which enables content producers to prevent copying of their content.

Note: An upcoming TechTip will look at DRM and its implications.

If you run into any video files with the extension .mpg or .mp4 you have an MPEG file on your hands. It's a popular format because it provides a good tradeoff between file size and quality. Just about every media player supports MPEG, although some players support the format better than others. I've found that it's a rare MPEG file that won't play on the various media players that I use in Linux or on Windows.

AVI

If there's a format that doesn't get a whole lot of respect it's AVI (short for Audio Video Interleave). Originally developed for Microsoft Windows, AVI has become ubiquitous across several operating system and on the Web. While it isn't as popular as it once was, it's not rare for you to run into AVI files

AVI files, which have the extension .avi, are often disparaged from a couple of reasons. First, they use little or no compression. That means the file sizes are larger than just about any other format out there. And AVI files often use a variety of codecs to encode them. This causes trouble, because you might not have the proper codec installed for your media player and the file won't play. This is especially true on operating systems other than Windows. It's not uncommon for an AVI to not play on Windows without the proper codec. Windows Media Player can sometimes automatically download that codec, but usually you'll have to search for it yourself.

Since it's an established format with a long history, you'll find that most media players for Windows, Mac OS, and Linux can handle a number of AVI files. The one player that I've found which works best is VLC.

WMV and ASF

Windows LogoWindows Media Video (WMF) and Advanced System Format File (ASF) were created in part to deal with the shortcomings of AVI.

WMV is a compressed file format (at least, with better compression than AVI) with the extension .wmv. It was developed primarily for streaming video across the Web. Microsoft claims that WMV has better file quality than MPEG. That may or may not be true, but WMV files are generally larger than MPEG files. Often by a factor of two.

ASF, on the other hand, is a container format for WMV. It encapsulates not only the video and audio data for a WMV file but also Windows Media DRM data. All of this is wrapped in a file with the extension .asf.

The biggest criticisms of WMV and ASF are that they're specific to Windows, and that ASF supports very restrictive DRM. As for the first complaint, it is possible to play WMV files on other operating systems. On Mac OS, for example, you can get a player called Flip4Mac WMV which enables you to edit WMV files and convert them to QuickTime. This allows you to play WMV files on not only your Mac but also on your iPod. On Linux, the VLC and xine players can handle WMV files that don't have DRM applied to them. Well, at least most of the time.

And that's the main point of contention with the second complaint. DRM-protected WMV and ASF files generally won't play on other operating systems, or with anything other than Windows Media Player on Windows. An interesting aside is that Microsoft's Zune player doesn't support Microsoft's DRM scheme so you can't play WMVs with DRM applied to them. Ironic, isn't it?

Flash Video

Flash LogoOnce upon a time, Flash was used almost exclusively to create demos, tutorials, and annoying splash pages for Web sites. Now, thanks to the popularity of video sharing sites like YouTube, Flash has become an almost ubiquitous video format.

Most Flash video files have the extension .flv or .swf, although you might see the files with the extension .f4p (protected Flash video). Flash is usually used for streaming video across the Internet, and is able to do this quite efficiently because files can be compressed to make them smaller.

Flash PlayerThe compression can be a bit of a problem, though. The main codec used to encode Flash files is based on bitmap images — each element and frame in the video is a set of pixels. When pixels are compressed, they become fuzzy and lose varying amounts of color depth. You've probably seen badly compressed Flash videos on YouTube. They're blurry and look washed out.

Flash is more or less a cross-platform format. Adobe Systems, which owns and develops the software that enables people to create and view Flash video, has Flash players for Windows, Mac OS, and Linux. On top of that, a number of media players (such as RealPlayer, Windows Media Player, VLC, xine, Gnash, and QuickTime Player) support Flash. Some of these players only support older versions of the Flash format, though.

canada viagra generic margin: 4px 5px 4px 10px; color: #000; font-family: Verdana, Geneva, sans-serif”>

QuickTime

Quicktime logoWhereas Windows has AVI (and now WMV and ASF), Mac OS has QuickTime. You can tell that you have a QuickTime file if you see the extension .mov or .qt.

QuickTime is a compressed format, using a compression scheme developed (and closely guarded) by Apple. This compression scheme is very efficient, and can noticeably shrink the size of a file but without losing much of the quality. In fact, QuickTime files arguably offer some of the best quality video available.

Quicktime WindoOne interesting characteristic of the QuickTime format is that it contains multiple tracks. Each track contains different types of data. For example, one track will contain audio, the second video, and the third subtitles. This separation of content makes a QuickTime file easy to edit.

QuickTime files are usually best played using Apple's own QuickTime Player, which is only available for Mac OS and Windows. You can also download add-ons for Windows Media Player to enable it to play back QuickTime files. On Linux, the MPlayer and xine media players can handle QuickTime although you might need to install additional codecs.

3GPP Multimedia

People don't just watch videos on their televisions and computers anymore. More and more, they're watching them on their smartphones as well. Whether it's an iPhone, a BlackBerry, or one of the many phones from companies like Nokia you can get and watch high-quality video on a device that literally fits in the palm of your hand.

One format that makes it possible is 3GPP multimedia. 3GPP (which has the extension .3gp) is one of those container formats that I mentioned at the beginning of this TechTip. It was created to move audio and video to mobile phones — either from phone to phone via email or MMS, or over the Internet.

Most modern smartphones, especially ones with built-in video capture and playback, will play and record 3GPP files. Like other formats, the quality of 3GPP files varies depending on the resolution of the camera used to capture the video and the compression options that were used when saving the file. Obviously, the higher the compression rate, the lower the quality of the video. I've received video taken with a smartphone that was fuzzy, and video that's been as clear as the best MPEG files I've seen.

While just about any smartphone will play 3GPP files, on the desktop only a handful of media players can handle these files. The best-known ones include VLC, RealPlayer, MPlayer, and Apple QuickTime Player.

Conclusion

This TechTip only describes the video formats that you will routinely run into. There are literally dozens more out there. You can find some basic information about various formats here, or by visiting Wikipedia.

Permalink • Print • Comment

February 20, 2009

The Web video showdown: Content providers, cable companies and the users stuck in the middle

February 19th, 2009

Posted by Larry Dignan

There’s a looming showdown over Web video as content providers wrestle with the future as the television business model that has paid the bills for years becomes strained. 

In the last day or so, Hulu has been on a tear as it rips down its content from other sites (Techmeme). First up, Hulu pulled content from TV.com, which is run by CBS Interactive, the parent of ZDNet. I wrote off the skirmish between TV.com and Hulu as big media theatrics–these massive media companies are always pulling content down to prove some point. But then there was Hulu’s move to rip its video down from Boxee. 

For starters, Hulu has every right to make such a move. Hulu–a joint venture between NBC and Fox–didn’t have a formal relationship with Boxee. In an explanatory blog post, Hulu chief Jason Kilar spoke like a man caught in between two behemoths he can’t control. 

Later this week, Hulu’s content will no longer be available through Boxee. While we never had a formal relationship with Boxee, we are under no illusions about the likely Boxee user response from this move. This has weighed heavily on the Hulu team, and we know it will weigh even more so on Boxee users.

Our content providers requested that we turn off access to our content via the Boxee product, and we are respecting their wishes. While we stubbornly believe in this brave new world of media convergence — bumps and all — we are also steadfast in our belief that the best way to achieve our ambitious, never-ending mission of making media easier for users is to work hand in hand with content owners. Without their content, none of what Hulu does would be possible, including providing you content via Hulu.com and our many distribution partner websites.

The big question here is this: Why was the request made now? Peter Kafka asks if the cable companies were behind Hulu’s put-the-Web-video-back-in-the-bottle attempt. 

Jason O’Grady: Hulu’s fantastic suicide

The answer: You bet. 

Here’s the deal: Cable companies pay content providers like Viacom and Disney big money to carry channels. When the economy was better cable companies weren’t going to sweat Web video experiments. It’s a different story today. Here’s what cable companies are facing:

The Wall Street Journal a few days ago chronicled how consumers are saving by ditching the cable service (they’re keeping the broadband service though). And Comcast’s fourth quarter results tell the tale. The cable giant actually saw a net subscriber decline. A lot of the cable problems are tied to the housing market–when you can’t afford to pay the mortgage chances are you’re not paying the cable bill either. Meanwhile, housing inventories are bloated and that also means a bunch of empty homes without cable service and customers that certainly won’t upgrade service. Here’s a look at Comcast’s customer metrics:

Comcast CFO Mike Angelakis acknowledged the troubles on the company’s earnings conference call:

The weak economy is impacting the consumer particularly on housing growth, vacancies and moves, providing us with fewer opportunities to sell new services.

Comcast operating chief Steve Burke expanded on that theme:

This earnings season everybody seems to be talking about the economy for obvious reasons. Instead of talking about the economy, what I’d like to do is be a bit more specific and talk about our marketplace. Our marketplace is affected by the economy and also by the ebb and flow of competition. In talking about our marketplace I’d like to highlight what we’re seeing, what we’re not seeing and also importantly what we’re doing about it.

In terms of what we’re seeing, first of all there’s more competition from the telephone companies, 10% of our footprint a year ago was over built, and today that number is more like 22%. Secondly, we’re seeing more price sensitivity particularly since the month of October. Third, its simply harder to make the phone ring with marketing and sales, customers appear to be defensive, they’re less likely to go out and subscribe or call up for upgrades or new services.

Hence our connects, the people coming into our business our connects are lower then we had planned. Finally, we’re seeing a very difficult ad sales environment that is currently showing no signs of improvement. Those are some of the things we’re seeing.

Burke then went on to list a few positives and noted Comcast can weather the storm–and it can.

But put yourself in the shoes of Mr. Cable mogul. You’re paying carriage fees to content companies that try to squeeze you for more money almost every year. Meanwhile, these content companies are showing video on the Web and kinda sorta monetizing it. Consumers are beginning to use Web video as a cable replacement. It’s only natural that cable companies would apply some pressure on content owners, which have to cave because Web video experiments aren’t paying the bills. 

In the context of dollars, the Hulu moves are perfectly logical. The rub: The Web video genie is out of the bottle and isn’t going back in. But in a rough economy there will be many more video skirmishes in the day ahead and users will be stuck in the crossfire. The television business model is complicated and has been under attack for years. The recession–or perhaps more accurately the decession–will push the content-cable-Web tug of war to the forefront.

Permalink • Print • Comment

February 19, 2009

How do I … create the autorun.inf file for my CDs and DVDs?

  • Date: November 11th, 2008
  • Author: Mark Kaelin

Contrary to what you may have heard from the RIAA, burning a CD-R or CD-RW is not an activity restricted only to music pirates. In many business situations, the burned CD is the best way to distribute information to a target audience. For communications involving PowerPoint presentations, HTML, PDF forms, Flash animations, or a number of other applications, the portable and durable CD has become a common delivery method.

The compact disk drive auto play feature, common to most operating systems, is a good way to simplify user experience. Auto play is controlled by a simple text-only file called autorun.inf. While there are dozens of software utilities available that will help you create the file, all you really need is a text editor and some basic knowledge.

This How do I… is based on Microsoft Windows, but other operating systems will read the autorun.inf file in a similar fashion.

Solution One: Create autorun.inf

The basic configuration of the autorun.inf states the program to run when the CD is inserted in the drive and the icon to display when the disk is viewed by Windows Explorer or other directory listing software. The text-only file, which resides in the root directory of the CD, should follow this pattern:

[autorun]
open=myprogram.exe
icon=myicon.ico

The icon file should also reside in the root directory of the CD.

Variations

Often the program you want to run will not be located in the root directory of the CD. If that is the case you must include the path:

[autorun]
open=folder1\folder1A\myfile.exe
icon=myicon.ico

Sometimes you may need to pass an argument to the program to be auto played:

[autorun]
open=myprogram.exe /argument
icon=myicon.ico

Not a program

Sending customers, salespeople, investors, and employees presentations, PDF files, and HTML documents requires a slight variation to the basic autorun.inf file and the addition of a DOS batch file to the CD root directory. The autorun.inf file opens a batch file, which then opens the file using the default program designated for that file type. For example:

[autorun]
open=autorun.bat index.htm
icon=myicon.ico

And the autorun.bat file reads:

echo off
@start %1 %2 %3 %4 %5 %6 %7 %8 %9
@exit

There is a variation on this idea that takes advantage of the ShellExecute command:

[autorun]
ShellExecute=index.htm
cialis without prescription /> icon=training.ico

Using the autorun.inf file to auto play your burned CDs will prevent another headache for your users and increase the likelihood of reaching your target audience. And because it is a simple text file, it can be created with a text editor and your normal disk-burning software.

Solution Two: Create autorun.inf

While creating your autorun.inf file according to Solution One will work for most of your users, it will fail for a small percentage who have issues with the autorun function in their particular installation of Windows. The batch file in the first solution makes no allowances for errors and will merely fail when an error is encountered.

This is where a shell utility can save the day, because these third-party applications contain routines for handling common errors and will complete the autorun process even if an error is encountered. For this example, we’ll use autorun.exe, which can be downloaded from Tarma Software Research. Tarma has made autorun.exe freely available for both personal and commercial use, and there are no requirements for copyright notices, etc.

To use autorun.exe, you make a simple modification to the autorun.inf file by replacing autorun.bat with the .exe file. The basic autorun.inf under this scenario would look like this:

[autorun]
open=autorun.exe index.htm
icon=myicon.ico

The only other requirement is that a copy of the 8KB autorun.exe file be included in the root directory of each burned CD. This application also contains several options and supports an extended autorun.inf structure that provides more flexibility in how you design your CD package.

Permalink • Print • Comment

February 18, 2009

Care For Your CDs

How often do you use CDs? Maybe you use a software CD every day or you listen to music CDs all the time. Whatever you may use a CD for, it's very important to take good care of them so they can perform at their best.

As you know, CDs are very fragile and they need to be handled with extreme care, or they could cialis professional generic instantly get dirty, get scratched or snap in half. You should only hold CDs by the outer edges or by the center hole with one finger.

To clean off any smudges, take a clean, soft and lint free cloth and wipe the backside surface of the CD. Start wiping from the center, moving outwards and wipe across the disc instead of in circles. Going in a circular motion can cause minor scratches, which will ruin the data on the CD.

If a simple once over doesn't do the job, you can use a slightly damp cloth to wipe over the CD again. You should always keep your CDs away from dust, liquids, household cleaners or any other corrosive products.

You should also try to keep your CD players clean by dusting them every so often. Always try to keep your CDs in their protective cases to try and combat any problems. CDs are a big part of the world today and if you use them often, you should do all you can to keep them safe and clean. Of course, this tip can also be used for DVDs.

Permalink • Print • Comment
« Previous PageNext Page »
Made with WordPress and an easy to customize WordPress theme • Sky Gold skin by Denis de Bernardy